Nighthawk Brand Aggressive Polish

Nighthawk Brand Aggressive Polish is a heavy cut polish designed to remove heavy scratches, oxidation, water spots, and capable of removing 800-1000 grit wet sanding scratches. Aggressive Polish is for machine use only on acrylic lacquer, enamels, and solid urethane paints which require the most extreme level of paint correction. Nighthawk Brand Aggressive Polish will leave a smooth glossy finish that is ready for light compounding or machine glazing. This product can also be used on glass to remove haze and hard water damage. The water-soluble formula makes it easy to remove the excess.

Scent: Clean

Body Shop Safe

This product does not contain Silicone making it safe for Body Shop Use

Water-Soluble 

Easily remove residual polish after buffing 

Machine Use Only

Dual Action or Rotary Buffers

9 out of 10

Nighthawk Brand Aggresive Polish earns a Verstility Score of 9 out of 10. This Product is a dedicated use product, however we were able to find multiple uses for it. In addition to being used for heavy paint correction, and scratch removal, it is our choice to remove heavy water spotting on painted surfaces and glass. The heavy abrasives make this polish applicable for use on Marine Gel Coat.

This Product can be used on Automotive, Marine, and Motorcycles

Nighthawk Brand Aggressive Polish is for machine use only for the removal of heavy scratches, oxidation, and paint correction. It can also remove most heavy waterspotting from painted and glass surfaces. Nighthawk Brand Aggresive Polish leaves the surface ready for light compounding or machine glazing.

Shake Well

Clean and dry your vehicle. Decontaminate the surface with a Nighthawk Brand Clay Bar prior to use. Shake well then apply 5-6 small drops to a foam buffer pad. Dab the pad on the desired area. At a slow buffer speed spread the polish around the area. Increase buffer speed to 800-1200 RPM for best results. Keep buffer in motion at all times. Apply moderate pressure until reaching the desired effect. Only work one area at a time. Buff away residual polish with a Nighthawk Brand Pearl Weave Buffing Microfiber Towel. Taping off trim and plastic is recommended prior to use. After completion of polishing process, apply a Nighthawk Brand Ceramic product for enhanced protection and a radiant shine. This Product can be used with a Dual Action or Rotary Buffer.