Nighthawk Brand Medium Polish

Nighthawk Brand Medium Polish is a medium fast cutting polish designed to remove light to moderate swirls, oxidation, water spots, and capable of removing 1000-1200 grit wet sanding scratches. Medium Polish is for machine or hand use and is safe on all types of paints. Nighthawk Brand Medium Polish is designed with hollow micro abrasives that break down into a finer polishing compound. This product can also be used on glass to remove haze and light to moderate hard water damage. The water-soluble formula makes it easy to remove the excess.

Scent: Banana

Body Shop Safe

This product does not contain Silicone making it safe for Body Shop Use

Water-Soluble 

Easily remove residual polish after buffing 

Machine or Hand Use 

Dual Action or Rotary Buffers or Hand Use

10 out of 10

Nighthawk Brand Medium Polish earns a Verstility Score of 10 out of 10 because it has multiple uses. This product can correct moderate scratches and swirls, moderate water spotting, and can be used on glass. The hollow microabrasives break down allowing it to act as a cutting compound and a finishing compound in one step. It is also our pick for headlight restoration.

This Product can be used on Automotive, Marine, and Motorcycles. It is an excellent product for headlight restoration.

Nighthawk Brand Polish is for machine or hand use for the removal of moderate scratches, swirls, oxidation, and paint correction. It can also remove most moderate waterspotting from painted and glass surfaces. Nighthawk Brand Medium Polish leaves the surface ready for light compounding or protection. It acts as a fine polish as well.

Shake Well

Clean and dry your vehicle. Decontaminate the surface with a Nighthawk Brand Clay Bar prior to use. Shake well then apply 5-6 small drops to a foam buffer pad. Dab the pad on the desired area. At a slow buffer speed spread the polish around the area. Increase buffer speed to 800-1200 RPM for best results. Keep buffer in motion at all times. Apply moderate pressure until reaching the desired effect. Only work one area at a time. Buff away residual polish with a Nighthawk Brand Pearl Weave Microfiber Towel. Taping off trim and plastic is recommended prior to use. After completion apply a Nighthawk Brand Ceramic product for enhanced protection and a radiant shine. This Product can be used with a Dual Action or Rotary Buffer, or by hand.